S1 pump
S1 pump
Click to enlarge image(s)
S1 pump - used where:
  • Water depth is and remains over 1/3 of the total vertical lift. The deeper you can submerse the pump in water, the more it will deliver. Water level self-regulates by virtue of the pump's design and operating principle.
  • Delivery rate can be as much as 8000L/hr, depending on the water source, submersion in water, lift above the water, air supply and piping size.
  • Vertical lift up to 100m (300ft) is no problem with a regular 5 to 15cfm off-the-shelf compressor. If the lift is higher, please contact us to discuss.
  • Submersion in water should be no more than around 60m (180ft) if using a regular 130psi compressor.
  • Bore casings need to be at least 4 inch ID (100mm)
  • For more information please go to our home page www.brumbypumps.com 
  • Price in Australian Dollars

Search by Keyword

Brumby Pump  ·  Products  ·  About Us  ·  Contact Us  ·  Privacy Policy  ·  Links
Copyright © Brumby Pumps, Toodyay, Western Australia